PILLAR SYSTEM STANDARD
Stand-alone pillar system for piping support. Perfect when there is no roof or wall available.
It is a cost-effective modern solution for stand alone systems.
Standard delivered:
- incl. anchors set M16 and fasteners
- excl. the piping, hoses en hose holders (separately available)
ART. NO. | Material/finish/color | Weight, kg | Dimentions, LxH, cm |
PHS033 | steel, zinc coated + epoxy spray painted in ERGOX ECL001 or ECL002* | 96 | 300×300 |
*Other colors upon request.
PILLAR SYSTEM CURVED
Stand-alone pillar system for piping support. Trendy and modern design system with the possibility of using sunroofs.
Standard delivered:
- incl. anchors set M20 and fasteners
- excl. the piping, hoses, hose holders and sunroofs (separately available)
ART. NO. | Material/finish/color | Weight, kg | Dimentions, LxH, cm |
PHS450 | steel, zink coated + epoxy spray painted in ERGOX ECL001 or ECL002* | 240 | 425×450 |
*Other colors upon request.
Sunroofs are recommended to use in combination with CURVED pillars. This combination is an eye-catcher of the modern car wash.
Sunroofs are made of strong but light material that stops up to 70% of sun light.
Available in standard size (distance between the pillars should be 400cm) and in 2 colors.
Standard delivered incl. elastic cord fixators
ART. NO. | Color | Material | Weight, kg | Dimentions, BxL, cm |
SUN00B | blue | PVC mesh 280g | 5 | 380×420 |
SUN00R | red |
PILLAR SYSTEM in T-FORM
Stand-alone pillar system for piping support. Perfect when the cars can be parked on both sides of the pillars row.
Standard delivered:
- incl. anchors set M16 and fasteners
- excl. the piping, hoses en hose holders (separately available)
ART. NO. | Material/finish/color | Weight, kg | Dimentions, LxH, cm |
PHS600 | steel, zinc coated + epoxy spray painted in ERGOX ECL001 or ECL002* | 151 | 600×300 |
*Other colors upon request.
RAILING PIPE FOR PILLAR SYSTEMS
Strong thick-walled pipe that can be used as a decorative parapet railing between the pillars (type standard, curved, T-form). Two of the railing pipes are normally installed between each two pillars on two different heights from the ground.
Often installed in places where the passage of people between the pillars needs to be prevented.
ART. NO. | Diameter, mm | Wall thickness, mm | Length, cm | Weight, kg | Material/finish/color |
PPZ051 | 51 | 3,5 | 400 | 18,5 | steel, zinc coated + epoxy spray painted in ECL001 |
PIPE AND CABLE TRAY SUPPORT SYSTEM
Support system to use indoor in case of roof/ceiling mounting.
Calculated per meter on base of the drawing of the location.
Standard delivered:
- incl. tray couplers and fasteners
- excl. tray support brackets
ART. NO. | Description | Tray size, BxHxL, cm | Material/finish/color |
CAT300 | Pipe/cable tray, incl. couplers and fasteners | 30x6x300 | steel, zinc coated |
CAT300E | steel, zinc coated + epoxy spray painted in ERGOX ECL001 or ECL002 |
For correct suspension of pipe/cable trays on ceiling/roof it is advised to use the tray support brackets on each 2-2,5m of tray support line. The brackets are separately available:
ART. NO. | Description | Material/finish/color |
CAT300CB | Cable tray support bracket for ceiling mounting, incl. fasteners and threaded rods | steel, zinc coated |
CAT300ECB | steel, zinc coated + epoxy spray painted in ERGOX ECL001 or ECL002 |
SUSPENSION CONSTRUCTION FOR WALL MOUNTING
Support system for piping and cables to use indoor in case of wall mounting.
Calculated per meter and produced on base of the drawing of the location.
Standard delivered:
- incl. couplers, fasteners and suspension cable
ART. NO. | Material/finish/color |
SCW000 | steel, epoxy spray painted / powder coated in ERGOX ECL001 or ECL002* |
*Other colors upon request.
PARAPET
Support system for vacuum tool holders and other accessories (carpet clamps, waste bins, etc…).
Calculated per meter and produced on base of the drawing of the location.
Standard delivered:
- incl. fasteners and brackets for wall-mount (one set for each 4-6m, depending on construction drawing of the location)
ART. NO. | Dimentions, mm | Application | Material/finish/color |
PAR150 |
150x50x3 L=custom made |
indoor | steel + epoxy spray painted in ERGOX ECL001 or ECL002* |
PAR150Z | indoor/outdoor | steel + zinc coated + epoxy spray painted in ERGOX ECL001 or ECL002* | |
PAR150S | indoor/outdoor | stainless steel AISI 304 |
The bracket, standard supplied with parapet, is used for connecting the parts of parapet together in one line AND for attaching the parapet to existing wall or to the parapet leg (see below).
If there is no possibility to mount the parapet on existing wall/structure, it can be also installed as a stand-alone construction. In this case a PARAPET LEG FOR FLOOR MOUNT should be foreseen each 4-6m of parapet line:
ART. NO. | Dimentions, mm | Application | Material/finish/color |
PAR150L |
150x50x3 H=1050 |
indoor | steel + epoxy spray painted in ERGOX ECL001 or ECL002* |
PAR150ZL | indoor/outdoor | steel + zinc coated + epoxy spray painted in ERGOX ECL001 or ECL002* | |
PAR150SL | indoor/outdoor | stainless steel AISI 304 |
*Other colors upon request.
UNIVERSAL ERGOX PILLAR
Stand-alone compact pillar that can be used for mounting ERGOX car wash accessories and holders (all separately available):
- tool holder
- air gun holder
- waste bin
- carpet clamp
- tire pump
Standard delivered:
- excl. holders, accessories and fasteners
ART. NO. | Material/finish/color | Weight, kg | Dimentions, cm |
CNS101 | steel, powder coated in RAL9005* | 14 |
12×12 (profile) 24×24 (base plate) H=130 |
*Other colors upon request.
Prefab fundament can be also separately supplied if necessary:
ART. NO. | Description |
FND101 | Fundament for CNS101 with cable management (optional) |
MULTIBOX
Modern stand-alone all-in-one box with all accessories within reach.
Small opening for waste container prevents the customer from leaving large garbage behind.
Powder coating in RAL color of choice makes it an eye-catcher of the modern car wash.
Standard delivered inclusive:
- build-in crevice tool holder (single or double)
- build-in air gun holder
- waste bin 40L
- carpet clamp
Standard delivered exclusive:
- crevice tool and air pressure gun (separately available)
ART. NO. | Description | Dimentions, BxDxH, cm | Weight, kg | Material/finish/color |
MLT001 | Multibox with single crevice tool holder | 43x74x107 | 75 | steel, powder coated in RAL color of choice |
MLT002 | Multibox with double crevice tool holder | 43x74x107 | 75 | steel, powder coated in RAL color of choice |